welcomeJiaxing Siren Machinery Co.Ltd
PRODUCT
Q-80Z cutting machine is composed of body, electric control box, cutting chamber, motor cooling system, cutting wheel and other parts. This cutting machine can not only cut round workpieces with a diameter of less than 80mm, but also can cut rectangular specimens with a height of 100mm and a depth of 200mm. The machine cools the sample through the cooling system to prevent the sample from overheating and burning the structure during the cutting process. The machine can also set the cutting speed for cutting different samples, thereby improving the quality of the cut samples. The machine is divided into manual and automatic cutting. After the large volume is cut, it is more convenient for the cutter to use
Technical parameter：
Main technical specifications
Maximum cutting diameter： | 80mm |
Infeed depth tracking： | LCD digital display |
Y-direction movement of the platform： | 275mm |
working desk size： | 310*290mm |
Clamping table specifications： | The fixture table is divided into left and right, the central cutting edge |
Cutting method： | Manual / Auto |
Way of giving： | Arbitrary adjustment (hand, self-dual use) |
Cutting speed： | The maximum is 0.25mm/s, and the automatic cutting method can be selected: intermittent cutting (metal workpiece) and continuous cutting (non-metal workpiece) |
Infeed distance： | Set as needed |
Reset method： | Automatic reset |
cooling system： | Automatic water cooling |
Water tank capacity： | 60L |
Spindle speed： | 2300r/min |
Motor Power： | 3KW |
Dimensions： | 910*750*600mm |
power supply： | Three-phase four-wire 380V50Hz |
weight： | Approximately 160kg |
Packing List
Name | Specification | Unit | quantity | Remark |
Automatic cutting machine | Q-80Z | pcs | 1 | |
Product Manual | pcs | 1 | ||
Product certification | pcs | 1 | ||
Packing List | pcs | 1 | ||
Water tank | pcs | 1 | ||
Water pump | pcs | 1 | ||
Anti-rust lubricating fluid | 2.5L | keg | 1 | |
Grinding wheel | 350*2.5*32mm | pcs | 2 | |
Pipe clamp | 13mm-19mm | pcs | 2 | one each |
Pipe clamp | 32mm | pcs | 1 | one each |
wrench | 12-14mm | pcs | 1 | |
wrench | 24-27mm | pcs | 1 | |
wrench | 36mm | pcs | 1 | |
Inlet pipe | pcs | 1 | ||
Drain pipe | pcs | 1 |
Time to cut the workpiece and consumption of the cutting piece:
(It takes about 1.5 minutes to cut the workpiece with a diameter of 8mm; the cutting piece consumes about 0.4mm; the cutting piece with a diameter of 25 takes about 5 minutes; the cutting piece consumes about 0.8mm)
